Ring with D jets

Fountain ring in the VERONA, COSTA variant

We encourage you to use a ring with C nozzles. Thanks to it, the fountain will gain an additional visual effect! The water will not only flow lazily with the figure standing on the fountain, but will also try to climb up the outline of her bowl. The fountain in such scenes used when connecting the ring software with the nozzles - water jets will start flowing out of all the nozzles.

Description

Pictures of fountains presented on the website of our online store are made in very good weather conditions (windless weather), it is not always possible to obtain the same effect of water jets in external conditions.

The rings after mounting to the fountain will require final nozzle alignment (manual bending of the tips). Depending on the settings of the installer, the water jets may differ in height - the effect is like in the pictures (the water jets are also not perfectly even).

It is also necessary to regularly clean the nozzles (blowing out, cleaning with a wire) - the product is ultimately used in external conditions, which means that dirt gets into the water every day, which causes impaired water flow in the ring / nozzle.

If the water ring is supplied only from a pump located in the fountain separator (the pump socket is covered), the water jets from the nozzles may be uneven or break down.

In large fountains (with a pond or from the ITALIA group) an additional pump can be installed to compensate for streams - we increase the pressure in the system.

If you have questions, please contact us.